Bag - hydrangea. Tutorial
On the hand
The process of creating (mainly - handmade, sewing machine used only to create the "inside" of the bag).
1. We make "modules"
We cut the squares of 20x20 cm ("the useful area of the module is 5 cm) / Mark the center / corners with the" envelope "/ fix it in the center / then again / fix it in the center and staple the envelope before-middle / turn and fold the envelope in the opposite direction side, fixing in the center / Ready modules and my assistant
2. Build the bag
(we collect the modules in the middle of the square - to the middle of the next one - a strip (8 modules) / assembly of strips between each other (4 layers)
The finished "canvas" of the bag (then I had to add 4 more modules.) The canvas was 8x4 (of 32 modules) - 40x32 cm. The front and the underside
We decorate with buttons-crystals and beads (from the inside small buttons for fastening). All the corners straighten out on-face
Obverse and reverse side
Sew the inner case from the main fabric. Round bottom (d = 13 cm) - 2 layers of fabric with strengthening by flashing Stitched cover (20x40 cm), sewn lock 10 cm on inner pocket (10х15 cm), kulisk.
To give stability, I strengthened the bottom on a rigid bracelet (I used rings (d = 0.8 cm) from trimmed plastic curtain hooks and cord) / And this is an inside view with an open lock
make a handle-bracelet (24x6 cm) 2 layers of the main fabric, inside the 2 layers of the two-thread. The outer side of the bracelet is a boucle (length 18 cm). Inside, the cord is threaded and fixed. / I corded the cord on the bag using rings (d = 0.8 cm) from trimmed plastic curtain hooks, but any other suitable ring
0 comment:
Post a Comment