Everyone knows that there is nothing eternal, everything comes into disrepair and loses its appearance. So is the furniture in the house, over time it becomes less attractive and untidy. However, do not despair and run to the store, buy something new. I want to offer you a solution and teach you to give old furniture a second chance and a new life.
Today we will update the old computer chair.To do this, you will need:• Actually, the chair itself.• White paint in can.• Upholstery fabric.• Building stapler.• Sewing machine.• A glue or anything to protect the floor from paint.
To begin with, we will replace the seat in our chair. Cut out a large square of cloth. It should be wider than the seat on all sides by about 15 cm. We bend all the edges, and stretch the square on the seat. The edges adhere to the back of the seat with a stapler.
That's how we bend the edges each time, before fixing the paper clip.
When properly stretched the sidewalls, go to the corners. We collect them in the accordion and fix the two docked halves to the back of the seat.
Now we go through the stapler along the edge of the corner to fix the cloth and cut off the extra, sticking out corner.
Small, sharp points of the fabric are also fastened with a stapler. It turns out that such a rear view.
Now we take out an armchair on the street. On the ground or floor, we use a sheet of oilcloth and put on it an armchair. Paint the can from the can and recolor the legs and wheels on our chair.
When the paint dries, put the seat in its place.
Now we will sew a simple cover for the back of our chair. To do this, in the width and length of the back, cut out two rectangles of fabric.
Sew the rectangles with each other on three sides.
We put the cover on the back of the chair.
So, it's easy and simple, we updated the old, out of office office chair.
0 comment:
Post a Comment