Create a funky and stylish way to carry your beauty products on the go with this Geometric DIY Makeup Bag. This adorable, little bag can be created out of scrap fabric and zips up to keep your powders, lipsticks, and eye shadows tucked away.
First you need to make the exterior panels. To do this we need to make some half square triangles.
You need 24 x 3″ fabric squares – six squares of each colour.
I chose grey, black, white and teal. You could use any colours, but I like the three monochromatic colours with the teal for a pop of brightness.
To start, pair your squares randomly. Take a pair and mark a line on the diagonal, corner to corner. Repeat for all remaining pairs.
Stitch either side of the line with a 1/4″ seam allowance. Repeat for all fabric pairs. Chain stitching makes this a very quick process.
Use you rotary cutter to cut down the middle line. Repeat for all fabric pairs.
Press them all open, they will look like the picture below. Trim off the little tails so you have squares.
Use your half square triangles to assemble two panels with three rows of four HSTs. Once you are satisfied with your layout, start stitching together your rows using a 1/4″ seam allowance.
Press your seams on each row.
Stitch your rows together using a 1/4″” seam allowance. Press when you are finished, trim if required.
Once your panels are finished and pressed you can put together your pouch.
Use your HST panels to cut two pieces of lining and two pieces of cotton batting the same size. You also need a zipper (I used a 6″ metal zipper) and some small scraps of fabric for zipper tabs.
If you don’t have batting you can use interfacing, fleece, flannel or something else that will give the pouch some sturdiness.
First take your zipper and tabs. Fold and press the ends of the fabric and stitch carefully onto either end of the zip.
Place your exterior on top of a piece of batting and treat them as one piece. Lay your zipper face down along the top.
Place your lining face down so that right sides are together. Stitch along the top the secure the zipper, lining and exterior.
Open out and repeat for the other side.
Open out and press gently. Top stitch down each side of the zipper to secure the pieces together and avoid the lining getting caught in the zip.
Open the zipper. This is important – you need it open so you can turn it out!
Open out so the exterior panels are right side together and the lining pieces are right side together. Stitch as shown in the picture.
Turn right side out and stitch the gap in the lining shut. Push the lining into the pouch.
You are finished! Admire your lovely zipper pouch!
0 comment:
Post a Comment